Dobby Loom

A Dobby Loom is a type of floor loom that controls the warp threads using a device called a dobby. Dobby is short for "draw boy" which refers to the weaver's helpers who used to control the warp thread by pulling on draw threads.
A dobby loom is an alternative to a treadle loom. Each of them is a floor loom in which every warp thread on the loom is attached to a single shaft using a device called a heddle. A shaft is sometimes known as a harness, but this terminology is becoming obsolete among active weavers. Each shaft controls a set of threads. Raising or lowering several shafts at the same time gives a huge variety of possible sheds through which the shuttle containing the weft thread can be thrown.

A manual dobby uses a chain of bars or lags each of which has pegs inserted to select the shafts to be moved. A computer assisted dobby loom uses a set of solenoids or other electronic devices to select the shafts. Activation of these solenoids is under the control of computer program. In either case the selected shafts are raised or lowered by either leg power on a dobby pedal or electric or other power sources.